Google      
  WWW DocMirror.net

[ RFC3366 | RFC Index | Protocol Standards | Linux Docs | FreeBSD Docs | RFC3368 ]

RFC 3367








Network Working Group                                            N. Popp
Request for Comments: 3367                                   M. Mealling
Category: Standards Track                                 VeriSign, Inc.
                                                              M. Moseley
                                                           Netword, Inc.
                                                             August 2002


                 Common Name Resolution Protocol (CNRP)

Status of this Memo

   This document specifies an Internet standards track protocol for the
   Internet community, and requests discussion and suggestions for
   improvements.  Please refer to the current edition of the "Internet
   Official Protocol Standards" (STD 1) for the standardization state
   and status of this protocol.  Distribution of this memo is unlimited.

Copyright Notice

   Copyright (C) The Internet Society (2002).  All Rights Reserved.

Abstract

   People often refer to things in the real world by a common name or
   phrase, e.g., a trade name, company name, or a book title.  These
   names are sometimes easier for people to remember and type than URLs.
   Furthermore, because of the limited syntax of URLs, companies and
   individuals are finding that the ones that might be most reasonable
   for their resources are being used elsewhere and so are unavailable.
   For the purposes of this document, a "common name" is a word or a
   phrase, without imposed syntactic structure, that may be associated
   with a resource.

   This effort is about the creation of a protocol for client
   applications to communicate with common name resolution services, as
   exemplified in both the browser enhancement and search site
   paradigms.  Although the protocol's primary function is resolution,
   it is also intended to address issues of internationalization and
   localization.  Name resolution services are not generic search
   services and thus do not need to provide complex Boolean query,
   relevance ranking or similar capabilities.  The protocol is a simple,
   minimal interoperable core.  Mechanisms for extension are provided,
   so that additional capabilities can be added.







Popp, et. al.               Standards Track                     [Page 1]


RFC 3367         Common Name Resolution Protocol (CNRP)      August 2002


Table of Contents

   1.      Introduction . . . . . . . . . . . . . . . . . . . . . . .  3
   2.      Important Notes  . . . . . . . . . . . . . . . . . . . . .  4
   2.1     Terminology  . . . . . . . . . . . . . . . . . . . . . . .  4
   2.2     DTD is Definitive  . . . . . . . . . . . . . . . . . . . .  4
   2.3     Uniform Resource Identifiers . . . . . . . . . . . . . . .  5
   3.      Interaction Model  . . . . . . . . . . . . . . . . . . . .  5
   3.1     Services, Servers, Datasets and Referrals  . . . . . . . .  5
   3.2     Requests and Responses . . . . . . . . . . . . . . . . . .  5
   3.3     Transport Independence . . . . . . . . . . . . . . . . . .  6
   3.4     Character encoding . . . . . . . . . . . . . . . . . . . .  6
   3.5     Queries  . . . . . . . . . . . . . . . . . . . . . . . . .  7
   3.6     Hints  . . . . . . . . . . . . . . . . . . . . . . . . . .  7
   4.      Object Model . . . . . . . . . . . . . . . . . . . . . . .  8
   4.1     Properties . . . . . . . . . . . . . . . . . . . . . . . .  8
   4.1.1   Core properties  . . . . . . . . . . . . . . . . . . . . .  8
   4.1.2   Abstract and custom properties . . . . . . . . . . . . . .  9
   4.1.3   Base properties  . . . . . . . . . . . . . . . . . . . . .  9
   4.1.4   Common name string encoding and equivalence rules  . . . . 11
   4.2     Objects  . . . . . . . . . . . . . . . . . . . . . . . . . 11
   4.2.1   Query  . . . . . . . . . . . . . . . . . . . . . . . . . . 11
   4.2.1.1 Logical operations within a Query  . . . . . . . . . . . . 12
   4.2.2   Results  . . . . . . . . . . . . . . . . . . . . . . . . . 13
   4.2.2.1 ResourceDescriptor . . . . . . . . . . . . . . . . . . . . 13
   4.2.3   Service  . . . . . . . . . . . . . . . . . . . . . . . . . 14
   4.2.3.1 Datasets . . . . . . . . . . . . . . . . . . . . . . . . . 14
   4.2.3.2 Servers  . . . . . . . . . . . . . . . . . . . . . . . . . 16
   4.2.4   Status Messages  . . . . . . . . . . . . . . . . . . . . . 19
   4.2.4.1 Status of CNRP, Not the Transport  . . . . . . . . . . . . 19
   4.2.4.2 Codes and Description  . . . . . . . . . . . . . . . . . . 19
   4.2.4.3 Status Codes . . . . . . . . . . . . . . . . . . . . . . . 19
   4.2.5   Referral . . . . . . . . . . . . . . . . . . . . . . . . . 21
   4.2.5.1 Loop Detection and Dataset Handling in Servers . . . . . . 22
   4.2.6   Discoverability: ServiceQuery and Schema . . . . . . . . . 24
   5.      XML DTD for CNRP . . . . . . . . . . . . . . . . . . . . . 26
   6.      Examples . . . . . . . . . . . . . . . . . . . . . . . . . 28
   6.1     Service Description Request  . . . . . . . . . . . . . . . 28
   6.2     Sending A Query and Getting A Response . . . . . . . . . . 29
   7.      Transport  . . . . . . . . . . . . . . . . . . . . . . . . 30
   7.1     HTTP Transport . . . . . . . . . . . . . . . . . . . . . . 30
   7.2     SMTP Transport . . . . . . . . . . . . . . . . . . . . . . 31
   8.      Registration: application/cnrp+xml . . . . . . . . . . . . 31
   9.      Security Considerations  . . . . . . . . . . . . . . . . . 32
   10.     IANA Considerations  . . . . . . . . . . . . . . . . . . . 32
           References . . . . . . . . . . . . . . . . . . . . . . . . 33





Popp, et. al.               Standards Track                     [Page 2]


RFC 3367         Common Name Resolution Protocol (CNRP)      August 2002


   A.      Appendix A: Well Known Property and Type Registration
           Templates  . . . . . . . . . . . . . . . . . . . . . . . . 35
   A.1     Properties . . . . . . . . . . . . . . . . . . . . . . . . 35
   A.2     Types  . . . . . . . . . . . . . . . . . . . . . . . . . . 35
   B.      Status Codes . . . . . . . . . . . . . . . . . . . . . . . 37
   B.1     Level 1 (Informative) Codes  . . . . . . . . . . . . . . . 37
   B.2     Level 2 (Success) Codes  . . . . . . . . . . . . . . . . . 38
   B.3     Level 3 (Partial Success) Codes  . . . . . . . . . . . . . 38
   B.4     Level 4 (Transient Failure) Codes  . . . . . . . . . . . . 40
   B.5     Level 5 (Permanent Failures) Codes . . . . . . . . . . . . 40
           Authors' Addresses . . . . . . . . . . . . . . . . . . . . 41
           Full Copyright Statement . . . . . . . . . . . . . . . . . 42

1. Introduction

   Services are arising that offer a mapping from common names to
   Internet resources (e.g., as identified by a URI).  These services
   often resolve common name categories such as company names, trade
   names, or common keywords.  Thus, such a resolution service may
   operate in one or a small number of categories or domains, or may
   expect the client to limit the resolution scope to a limited number
   of categories or domains.  For example, the phrase "Internet
   Engineering Task Force" is a common name in the "organization"
   category, as is "Moby Dick" in the book category.

   Two classes of clients of such services are being built, browser
   improvements and web accessible front-end services.  Browser
   enhancements modify the "open" or "address" field of a browser so
   that a common name can be entered instead of a URL.  Internet search
   sites integrate common name resolution services as a complement to
   search.  In both cases, these may be clients of back-end resolution
   services.  In the browser case, the browser must talk to a service
   that will resolve the common name.  The search sites are accessed via
   a browser.  In some cases, the search site may also be the back-end
   resolution service, but in others, the search site is a front-end to
   a collection of back-end services.

   This effort is about the creation of a protocol for client
   applications to communicate with common name resolution services, as
   exemplified in both the browser enhancement and search site
   paradigms.  Name resolution services are not generic search services
   and thus do not need to provide complex Boolean query, relevance
   ranking or similar capabilities.  The protocol is a simple, minimal
   interoperable core.  Mechanisms for extension are provided, so that
   additional capabilities can be added.






Popp, et. al.               Standards Track                     [Page 3]


RFC 3367         Common Name Resolution Protocol (CNRP)      August 2002


   Several other issues, while of importance to the deployment of common
   name resolution services, are outside of the resolution protocol
   itself and are not in the initial scope of the proposed effort.
   These include discovery and selection of resolution service
   providers, administration of resolution services, name registration,
   name ownership, and methods for creating, identifying or insuring
   unique common names.

   For the purposes of this document, a "common name" is a word or a
   phrase, without imposed syntactic structure, that may be associated
   with a resource.  These common names will be used primarily by
   humans, as opposed to machine agents.  A common name "resolution
   service" handles these associations between common names and data
   (resources, information about resources, pointers to locations,
   etc.).  A single common name may be associated with different data
   records, and more than one resolution service is expected to exist.
   Any common name may be used in any resolution service.

   Common names are not URIs (Uniform Resource Identifiers) in that they
   lack the syntactic structure imposed by URIs; furthermore, unlike
   URNs, there is no requirement of uniqueness or persistence of the
   association between a common name and a resource.  (Note: common
   names may be expressed in a URI, the syntax for which is described in
   RFC 3368 [9].)

   This document will define a protocol for the parameterized resolution
   necessary to make common names useful.  "Resolution" is defined as
   the retrieval of data associated (a priori) with descriptors that
   match the input request.  "Parameterized" means the ability to have a
   multi-property descriptor.  Descriptors are not required to provide
   unique identification, therefore 0 or more records may be returned to
   meet a specific input query.

2. Important Notes

2.1 Terminology

   The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT",
   "SHOULD", "SHOULD NOT", "RECOMMENDED", "MAY", and "OPTIONAL" in this
   document are to be interpreted as described in RFC 2119 [7].

2.2 DTD is Definitive

   The descriptive portions of this document contain pieces of XML that
   are *illustrative examples only*.  Section 5 of this document
   contains the XML DTD for CNRP, which is definitive.  If any
   discrepancies are found, the DTD wins.




Popp, et. al.               Standards Track                     [Page 4]


RFC 3367         Common Name Resolution Protocol (CNRP)      August 2002


2.3 Uniform Resource Identifiers

   All URIs used within the CNRP protocol MUST adhere to the
   'absoluteURI' production found in the ABNF of [3].  CNRP does not
   define the semantics of a Base and therefore is not capable of
   expressing the 'URI-Reference' production.

3. Interaction Model

3.1 Services, Servers, Datasets and Referrals

   CNRP assumes a particular interaction model where a generalized
   "service" provides common name resolution at one or more actual
   "servers".  If the data contained in all its servers is identical
   (mirrors), the service need not identify any particular subset of
   data.  If, however, the service provides different collections of
   data through different servers (e.g., subsets, specialized
   collections, etc.), it SHOULD indicate what subsets of its data that
   each server offers.  This is done by using URIs to uniquely
   disambiguate one dataset from another.  If the service offers a copy
   of a collection of data on agreement with a foreign service, the
   foreign service SHOULD provide a dataset URI to allow the collection
   to be identified as related to its own offerings.

   CNRP supports the concept of referrals.  This is where a server can
   know that another Service exists, within the same Service or
   elsewhere, that can provide further answers to a particular query but
   decides to forward that fact onto the client instead of chaining the
   query for the client.  A referral is sent along with the rest of the
   results from a server (if any).  Referrals to a service SHOULD
   indicate the particular dataseturi that triggered the referral, if it
   is known.  See Section 4.2.5 for details on referrals and loop
   detection.

3.2 Requests and Responses

   The protocol consists of a simple request/response mechanism.  A
   client sends one of a few types of requests to a server which
   responds with the results of that request.  All requests and
   responses are encoded with XML [8] using the DTD found in Section 5.
   There are two types of requests.  One is a general query for a
   common-name.  The other is a request for an object that describes the
   service and its capabilities.  There is only one type of response
   which is a set of results.  Results can contain actual result items,
   referrals and/or status messages.






Popp, et. al.               Standards Track                     [Page 5]


RFC 3367         Common Name Resolution Protocol (CNRP)      August 2002


3.3 Transport Independence

   CNRP is completely encapsulated within its XML definition, and is
   therefore transport-independent in its specification.  However,
   clients need to have a clearly defined means of bootstrapping a
   connection with a server.

   It is possible to define special-purpose applications that use CNRP
   but which never need the HTTP bootstrapping method outlined below;
   those applications MUST define how to find the appropriate
   server/port/protocol.  CNRP servers dedicated to those applications
   may provide service only on the ports/transport protocols defined by
   the application.

   All other (generic) CNRP clients and servers MUST support the HTTP
   (Section 7.1) transport on the default CNRP port of 1096.

   Note that a particular service may choose to change to a different
   transport or port via statements within a CNRP service description
   request, but with initial contacts between a client and a server
   being over HTTP on port 1096.  For a short explanation of how CNRP
   employs HTTP, see Section 7.1 of this document.  If other transports
   are used, they MUST be handled over a port other than the default
   CNRP port.

3.4 Character Encoding

   To guarantee interoperability, the following provisions apply:

   o  XML queries and responses MUST be encoded as UTF-8.

      Note: As in any XML document, numeric character references may be
      used.

   o  The encoding of characters in the CNRP URI is based on UTF-8; for
      details, please see [9].

   Any interfaces electing to present/accept protocol elements in other
   representations are responsible for accurate transcoding for use in
   CNRP protocol elements, per the above provisions.











Popp, et. al.               Standards Track                     [Page 6]


RFC 3367         Common Name Resolution Protocol (CNRP)      August 2002


3.5 Queries

   Queries are sent by the client to the server.  There are two types of
   queries.

   1.  A `special' initial query that establishes the schema for a
       particular CNRP database and communicates that to the client.
       The CNRP client will send this query, and in turn receive an XML
       document defining the query properties that the database
       supports.  (In CNRP, XML [8] is used to define and express all
       objects.)  This query is called the 'servicequery' in the DTD.
       In the case where a client does not know anything about the
       Service, the client MAY assume that it can at least issue the
       request via HTTP.

   2.  A `standard' query, which is the submission of the CNRP search
       string to the database.  The query will conform to the schema
       that MAY have been previously retrieved from the service.

   There will be a set of query properties, listed below, treated as
   hints by the server.  Note: a CNRP database will accept any correctly
   encoded CNRP query property; the extent to which a query result is
   responsive to those properties is a service differentiator.  The base
   properties that are always supported are common name, language,
   geography, category, and range (start and length of the result set).
   CNRP allows database service providers to create unique data types
   and expose them to any CNRP client via the CNRP schema XML documents.

3.6 Hints

   A hint is an assertion by the user about himself, herself or itself
   and the context in which he/she/it is operating.  There is no data
   type `hint'; a hint is expressed within the structure of the query
   itself and is limited or enabled by the richness of the defined query
   namespace.  In effect, a query and any property within it is a hint.

   For example, the "language" property can be given as a hint in a
   query; this may be used to order search results.  If one wants
   results first in US English followed by European French and finally
   South American Spanish, the following can be included in the query:

      <property name="language" type="rfc1766">en-US</property>

      <property name="language" type="rfc1766">fr-FR</property>

      <property name="language" type="rfc1766">sp-MX</property>





Popp, et. al.               Standards Track                     [Page 7]


RFC 3367         Common Name Resolution Protocol (CNRP)      August 2002


   Note that the property statements say nothing about whether the
   language is primary, secondary, etc.  In this example, the ordering
   of the statement controls that--the first statement, being first,
   means that US English is the primary language.  The second statement
   specifies the second region/language, and so on.  *But this is only
   an example.*  The extent to which hints are supported (or not) is a
   service differentiator.

   The fact that a hint exists does not mean that a CNRP database must
   respond to it.  This best-effort approach is similar to relevance
   ranking in a search engine (high precision, low recall); hints are
   similar to a search engine's selection criteria.  CNRP services will
   attempt to return the results "closest" to the selection criteria.
   This is quite different from a SQL database approach where a SQL
   query returns the entire results set and each result in the set must
   match all the requirements expressed by the qualifier (the SQL WHERE
   clause).

4. Object Model

4.1 Properties

   In CNRP, objects are property lists.  A property is a named
   attribute.  A property also has a well-defined type.  Some properties
   can be part of the query or the results list or both.  For
   simplicity, CNRP is limiting property values to string values.

4.1.1 Core Properties

   CNRP introduces a set of core properties.  Core properties are the
   minimal set of properties that all CNRP services MUST support in
   order to reach CNRP compliance.  Hence, the core properties define
   the level of interoperability between all CNRP services.  The core
   properties are:

   1.  CommonName: the common name associated with a resource.

   2.  ID: an opaque string that serves as a unique identifier for a
       result from a Service (typically a database ID).  The ID is not
       globally unique, nor necessarily persistent (e.g., between
       queries at a given Service).

   3.  resourceURI: An 'absoluteURI' as defined in the collected ABNF
       found in RFC 2396 [3].

   4.  description: A free text description of the resource.





Popp, et. al.               Standards Track                     [Page 8]


RFC 3367         Common Name Resolution Protocol (CNRP)      August 2002


4.1.2 Abstract and Custom Properties

   In addition to core properties, CNRP introduces the notion of
   abstract properties.  The abstract property element provides schema
   extensibility beyond the core properties.  The notion of abstract
   property is extremely important in CNRP since it enables a wider
   range of CNRP based services than those based on the core properties.

   To create concrete custom properties, a CNRP service must define a
   property name and a property type.  Therefore, there are really two
   ways to create a custom property.  The first way is to create a new
   property name and define at least one type for it.  Another way is to
   extend an existing property by defining a new type.  The "geography"
   property discussed in the next section is an example of a multi-type
   property.  Note that a type is only applicable to the property it is
   defined for.  If a new property is defined, a new type MUST be
   defined even though the value set for that type may be identical to
   an existing type for an existing property.  In other words, types are
   scoped to a given property.  Custom properties MUST be registered
   with IANA.  Details about the registration process for new properties
   can be found in Section 10.

   For example, let us assume that a CNRP service specialized on online
   books would like to introduce the ISBN property of type "number".
   This property would encapsulate the ISBN number of the book online
   and would have he following XML representation:

      <property name="isbn" type="number">92347231</property>

4.1.3 Base Properties

   Illustrating the use of abstract property to extend the core schema,
   CNRP also defines a set of custom properties called base properties.
   In order to keep the requirements extremely simple, these properties
   are not mandatory to implement to reach CNRP compliance.  Although,
   these properties are not required, it is expected that many services,
   especially large ones, will implement them.  An equally important
   goal for introducing additional properties is to provide a results
   filtering mechanism.  This is a requirement for large namespaces that
   contain several million names.











Popp, et. al.               Standards Track                     [Page 9]


RFC 3367         Common Name Resolution Protocol (CNRP)      August 2002


   The base properties and their types are defined in Appendix A but
   listed here for clarity:

   o  Language:
      The language associated with a resource.  The default type of this
      property is 'RFC1766' and the vocabulary is drawn from the list of
      languages in RFC 1766 [4].  If RFC 1766 is updated, then the
      values listed in the updated version are also valid for this type.

   o  Geography:
      The geographical region or location associated with a resource.
      Some of the possible types are listed below.  See Appendix A for a
      complete list of types specified by this document.

      *  'freeform': a free form expression for a geographical location
         (e.g., "palo alto in california").

      *  'ISO3166-1': geographical region expressed using a standard
         country code as defined by ISO3166-1 (e.g., "US").

      *  'ISO3166-2': value = a geographical region expressed using a
         standard region and country codes as defined by ISO3166-2
         (e.g., "US-CA").

      *  'lat-long': the latitude and longitude of a geographical
         location.

   o  Category:
      The category associated with a resource.  There are large numbers
      of possible types for this property.  Two possible ones are:

      1.  'freeform': a free form expression for a category (e.g.,
          "movies").

      2.  'NAICS': The North American Industry Code System.

   o  Range:
      The range is a results set control property.  The range property
      is used to specify the starting point and the length of a results
      set (e.g., I want 5 records starting at the 10th record).  It
      should only ever have one type but, in the interest of
      extensibility and consistency, others can be created if there is a
      need.  The default type is 'start-length' which takes the form of
      two integers separated by a dash.  The first integer is the
      starting number and the second is the number of values to include.






Popp, et. al.               Standards Track                    [Page 10]


RFC 3367         Common Name Resolution Protocol (CNRP)      August 2002


   o  Dataseturi: An absoluteURI (as defined in [3] that identifies a
      defined set of Common Names and associated data.

   Note: For many properties the default "type" is "freeform".  The free
   form type value is important because it allows very simple user
   interface where the user can enter a value in a text field.  It is up
   to the service to interpret the value correctly and take advantage of
   it to increase the relevance of results (using specialized
   dictionaries for instance).

4.1.4 Common Name String Encoding and Equivalence Rules

   CNRP specifies that common name strings should be encoded using UTF-
   8.  CNRP does not specify any string equivalence rules for matching a
   common name in the query against a common name of a Resource.  String
   equivalence rules are language and service dependent.  They are
   specific to relevance ranking algorithms, hence treated as CNRP
   services.  Consequently, string equivalence rules are not part of the
   CNRP protocol specification.  For example, the query member:

      <commonname>bmw</commonname>

   should be read as a selection criterion for a resource with a common
   name LIKE (similar to) the string "bmw" where the exact definition of
   the LIKE operator is intuitive, yet specific to the queried CNRP
   service.

   It is also important to note that XML treats whitespace as a special
   case in many situations.  In some cases, it collapses whitespace into
   a single space.  Both client and server Implementors are warned to
   reference the XML standard for the various ramifications of using
   whitespace in queries and/or results.

4.2 Objects

4.2.1 Query

   The Query object encapsulates all the query components such as
   CommonName, ID, and any properties.  A Query cannot be empty.  A
   Query must contain either one and only one common name, or one and
   only one ID.  A Query can also contain the custom properties defined
   by a specific CNRP service.









Popp, et. al.               Standards Track                    [Page 11]


RFC 3367         Common Name Resolution Protocol (CNRP)      August 2002


   For example, a query for the first 5 resources whose common name is
   like "bmw" would be expressed as:

   <query>
           <commonname>bmw</commonname>
           <property name="range" type="start-length">1-5</property>
   </query>

4.2.1.1 Logical Operations Within a Query

   The Query syntax is extremely simple.  CNRP does not extensively
   support Boolean logic operator such as OR, AND or NOT.  However,
   there exist two implicit logical operations that can be expressed
   through the Query object and its properties.  First, a query with
   multiple property-value pairs implicitly expresses an AND operation
   on the query terms.  For instance, the CNRP query to request all the
   resources whose common name is like "bmw", AND whose language is
   "German" can be expressed as:

   <query>
        <commonname>bmw</commonname>
        <property name="language" type="rfc1766">
           de-DE
        </property>
   </query>

   Note however, that because the server is only trying to best match
   the Query criteria, there is no guarantee that all or any of the
   resources in the results match both requirements.

   In addition, CNRP allows the client to express a logical OR by
   specifying multiple values for the same property within the Query.
   For example, the logical expression:

      property = value1 OR property = value2 OR property = valueN

   Will be expressed as:

   <property>value1</property>
   <property>value2</property>
   <property>valueN</property>

   So if there are different properties expressed, CNRP ANDs them; if
   there are multiples instances of the same property expressed, CNRP
   ORs them.






Popp, et. al.               Standards Track                    [Page 12]


RFC 3367         Common Name Resolution Protocol (CNRP)      August 2002


   It is important to underline that this form is only applicable to
   properties (with the exception of the CommonName itself which, even
   though it is a property, is the entire point of the query).  In
   particular, logical OR operations on the common name are not
   supported.  Note that the ordering or the property-value pairs in the
   query implies a precedence.  As a consequence, CNRP also introduces
   one special string value: "*".  Not surprisingly, "*" means all
   admissible values for the typed property.  For example, the following
   query requests all the resources whose common name is like BMW and
   whose language is preferably in German or French or any other
   language.

   <query>
        <commonname>bmw</commonname>
        <property name="language" type="rfc1766">de-DE</property>
        <property name="language" type="rfc1766">fr-FR</property>
        <property name="language" type="rfc1766">*</property>
   </query>

4.2.2 Results

   The results object is a container for CNRP results.  The type of
   objects contained in Results can be: ResourceDescriptor, Error,
   Referral and Schema.  Results from a CNRP service are ordered by
   decreasing relevance.  When the results set contains results from
   multiple CNRP services, the results can no longer be ordered (since
   relevance ranking is specific to a given service).  In that case,
   however, note that results originating from the same service remain
   ordered.

4.2.2.1 ResourceDescriptor

   The ResourceDescriptor object describes an Internet resource (e.g., a
   Web page, a person, any object identified by a URI).  Therefore, the
   ResourceDescriptor MUST always include the resourceURI property.  The
   ResourceDescriptor can also contain the commonname, URI, ID (the ID
   of this entry in the service's database), description, language,
   geography, and category of the resource.  A ResourceDescriptor can
   also be augmented using custom properties and can reference a service
   object to indicate its origin (using the serviceRef element).  As
   with referrals, a resourcedescriptor block can also contain an ID
   attribute that is used by a status message to refer to a particular
   resourcedescriptor.  Be careful not to confuse this ID with the id
   tag itself which refers to the database id of the actual database
   entry.






Popp, et. al.               Standards Track                    [Page 13]


RFC 3367         Common Name Resolution Protocol (CNRP)      August 2002


   <results>
        <service id="i0">
             <serviceuri>http://cnrp.bar.com/</serviceuri>;
        </service>
        <resourcedescriptor id="i1">
             <commonname>bmw</commonname>
             <id>foo.com:234364</id>
             <resourceuri>http://www.bmw.de/</resourceuri>;
             <serviceref ref="i0" />
             <description>BMW Motorcycles, International</description>
             <property name="language" type="rfc1766">de-DE</property>
        </resourcedescriptor>
        <referral>
             <serviceref ref="i0" />
        </referral>
   </results>

4.2.3 Service

   The Service object provides an encapsulation of an instance of a CNRP
   service.  A service is uniquely identified through the serviceuri tag
   which MUST be included in the Service object.  A Service object MAY
   include a a brief textual description of the service.  It MAY include
   datasets, servers and custom properties.

   <service>
        <serviceuri>http://cnrp.foo.com</serviceuri>;
        <description>foo.com is a CNRP service specialized on cocktail
           recipes</description>
   </service>

   The service object MAY also be extended by including existing
   properties to further describe the service.  For instance, a service
   that focuses on French companies could be expressed as:

   <service>
        <serviceuri>http://cnrp.foo.com</serviceuri>;
        <property name="category" type="freeform">companies</property>
        <property name="geography" type="ISO3166-1">FR</property>
   </service>

4.2.3.1 Datasets

   The dataset object represents a set of CN-to-URI mappings.  For
   example, the database of AOL keywords and their URIs constitute a
   dataset.  The dataset object allows a CNRP implementation to uniquely
   identify the database(s) of mappings that it resolves.  In that
   respect, the notion of dataset allows a separation between resolution



Popp, et. al.               Standards Track                    [Page 14]


RFC 3367         Common Name Resolution Protocol (CNRP)      August 2002


   and data, providing the mechanism for a CNRP service to resolve
   common-names on behalf of another CNRP service or even multiple
   services.  Conversely, the same dataset can be served by two distinct
   CNRP services.  Since a CNRP service can resolve names within one or
   more datasets, the service object can contain one or more dataset
   objects (zero if the dataset is not formally declared).

   Within the service object, a dataset is uniquely defined using the
   dataseturi property.  Other properties, such as language and
   description, can describe the dataset further.  Like the service
   object, the dataset object has an ID attribute associated with it
   that is unique within a particular XML message.  Like the service
   object's ID attribute, this ID is used by resourcedescriptors and
   referrals to specify which service and/or dataset they came from or
   are referring to.

   Any service can be said to have a 'default dataset' which is the
   dataset that considered to have been used if a server simply responds
   to a client's query that didn't contain a dataset.  The 'default
   dataset' can also be said to be the only dataset that is used by
   Services that don't support datasets at all.  This concept is useful
   for clients that intend on doing rigorous loop detection by way of
   keeping a list of visited service/dataset nodes.

   This example illustrates how the service object would look as it
   defines two datasets:

   <service id="i0">
    <serviceuri>http://acmecorp.com</serviceuri>;
    <dataset id="i1">
      <property name="dataseturi">
         urn:oid:1.2.3.4.666.5.4.3.1
      </property>
      <property name="language">en-us</property>
      <property name="language">en-gb</property>
    </dataset>
    <dataset id="i2">
      <property name="dataseturi">
         urn:oid:1.2.3.4.666.10.9.8.7.6
      </property>
      <property name="language">fr</property>
    </dataset>
   </service>

   The dataseturi property can also be used within the query as a hint
   to the service for the dataset within which the commonname should be
   resolved:




Popp, et. al.               Standards Track                    [Page 15]


RFC 3367         Common Name Resolution Protocol (CNRP)      August 2002


   <query>
      <commonname>toys r us</commonname>
      <property name="dataseturi">urn:oid:1.2.3.4.666.5.4.3.1</property>
   </query>

   It is important to note that resolution rules (i.e., string
   equivalence, relevance ranking, etc.) are likely to be dataset
   specific.  This is true even if the resolution is provided by the
   same service.

   Another use of the dataseturi property is in a referral.  In that
   case, the datasetref tag is used to pinpoint a specific dataset
   within the service.

   <referral>
      <serviceref ref="i0" /><datasetref ref="i1" />
   </referral>

   While the concept of datasets is important for services wishing to
   make their data available via other services, it is important to
   remember that the declaration and use of datasets is completely
   optional.  Compliance with the CNRP protocol does not require a
   service object to define or reference any dataset object.  The only
   requirement for compliance is that a client and/or server know the
   format of the particular XML tags and deal with them syntactically.
   If it chooses to ignore them, then this is well within its rights.

4.2.3.2 Servers

   The service object also encapsulates a list of server objects.  The
   server object is used to describe a CNRP server or set of servers.  A
   server is identified through its serveruri.  The URI used to identify
   a server is not a CNRP URI [9], but instead, is a URI of the scheme
   used as the CNRP transport mechanism.  I.e., for a CNRP server that
   will communicate via the HTTP protocol to the host foo.com on port
   6543, the serveruri would be http://foo.com:6543.  If some other
   information is required in order for the correct transport to be
   used, then that information can be communicated via other properties.
   Note that a Service MUST have at least one Server that responds on
   the default CNRP port in order for a client to get the initial
   Service object.

   A server can serve one or more datasets declared by its service.  The
   served databases are specified using the dataseturi property.  As for
   other objects, a server can be further described using descriptive
   properties such as geography and description.  The following XML
   completes the service definition from the previous example by
   defining two CNRP servers.  One server is located in the US and the



Popp, et. al.               Standards Track                    [Page 16]


RFC 3367         Common Name Resolution Protocol (CNRP)      August 2002


   other is located in France.  The US server is specialized and only
   serves the French dataset.

     <servers>
        <server>
           <serveruri>cnrp://router.us.widgetco.com:4321</serveruri>
           <property name="geography" type="ISO3166-1">US</property>
        </server>
        <server>
           <serveruri>cnrp://router.fr.acmeco.com:4321</serveruri>
           <property name="geography" type="ISO3166-1">FR</property>
        </server>
     </servers>

   As we will see in a following section, the Service object can contain
   Schema objects.  These Schema objects fully describe the query and
   response interfaces implemented by a CNRP service.  In that regard,
   the Service object is essential to discoverability.  It constitutes
   the main entry point for a CNRP client to dynamically discover the
   capabilities of a resolution service.  For that purpose, the Service
   object can be returned as part of the response to any resolution
   query.  Furthermore, the Service object is the dedicated response to
   the specialized servicequery (see Section 4.2.6).

   Another use of Service is for other objects to indicate their CNRP
   service of origin.  System messages, referrals and
   resourcedescriptors can include a reference to their Service object.
   For example, imagine a CNRP service that acts as a proxy for multiple
   CNRP services.  For example, it is a requirement that CNRP allows
   aggregation of results from different sources.  Consider one such
   CNRP service that acts as a proxy for multiple CNRP services.  In
   this mode, the proxy service contacts each CNRP sub-service in
   parallel or serially.  Then, the proxy combines the individual result
   sets into a unique response returned to the CNRP client.  Since the
   aggregate result set contains resourcedescriptors from different
   services, the proxy adds a servicereference tag within each
   individual result to indicate their service of origin.  In the event
   one of the referred services resolves names within multiple datasets,
   it is possible for these objects to refer to a specific dataset
   within the service by using the datasetref tag.  This example is of a
   hybrid result set with resourcedescriptors referencing their service
   and dataset of origin:









Popp, et. al.               Standards Track                    [Page 17]


RFC 3367         Common Name Resolution Protocol (CNRP)      August 2002


   <?xml version="1.0"?>
   <!DOCTYPE cnrp PUBLIC "-//IETF//DTD CNRP 1.0//EN"
       "http://ietf.org/dtd/cnrp-1.0.dtd">;
   <cnrp>
        <results>
             <service id="i0">
                  <serviceuri>http://acmecorp.com</serviceuri>;
                  <dataset id="i1">
                     <property name="dataseturi">
                      urn:oid:1.2.3.4.666.5.4.3.1
                     </property>
                  </dataset>
                  <dataset id="i2">
                     <property name="dataseturi">
                      urn:oid:1.2.3.4.666.10.9.8.7.6
                     </property>
                  </dataset>
             </service>
             <service id="i3">
                <serviceuri>http://serverfarm.acmecorp.com</serviceuri>;
             </service>
             <service id="i4">
                 <serviceuri>http://servers.acmecorp.co.uk</serviceuri>;
                 <dataset id="i5">
                     <property name="dataseturi">
                       urn:oid:1.2.3.4.666.5.4.3.1
                     </property>
                 </dataset>
             </service>
             <resourcedescriptor>
                       <commonname>Fidonet</commonname>
                       <id>1333459455</id>
                       <resourceuri>http://www.fidonet.ca</resourceuri>;
                       <serviceref ref="i0" /><datasetref ref="i1" />
                       <description>This is ye olde Canadian
                        Fidonet</description>
             </resourcedescriptor>
             <resourcedescriptor>
                       <commonname>Fidonet</commonname>
                       <id>1333459455</id>
                       <resourceuri>http://host:port/bla</resourceuri>;
                       <serviceref ref="i3" />
                       <description>An old Fidonet node</description>
             </resourcedescriptor>
             <referral>
                 <serviceref ref="i0" /><datasetref ref="i2" />
             </referral>
        </results>



Popp, et. al.               Standards Track                    [Page 18]


RFC 3367         Common Name Resolution Protocol (CNRP)      August 2002


   </cnrp>

4.2.4 Status Messages

4.2.4.1 Status of CNRP, Not the Transport

   The status messages defined here are only applicable to operations
   defined by CNRP itself.  If some feature or operation is defined by
   the transport (security via HTTP, mail failure via SMTP, etc.), then
   any status messages about that operation MUST be sent in accordance
   with that transport's reporting mechanism and not via CNRP.

4.2.4.2 Codes and Description

   A Status object indicates a message to the client in the results set.
   The object encapsulates two values: a status code and a description.
   The description can contain a textual description of the status being
   communicated.  In many cases, additional diagnostic information can
   also be included.  No attempt is made to standardize the description
   of a given status code since the only programmatic element that
   matters is the actual code.

   A status message can also specify which other CNRP element it refers
   to by including a reference to the ID of the element in question.
   For example, if a Service block has an ID of "i2" and a status
   message refers to that block, then it can put that ID in its ref
   attribute.

            <status code="x.y.z" ref="i2">
                 The CNRP foo.com database is temporarily unreachable
            </status>

4.2.4.3 Status Codes

   The organization of status codes is taken from RFC 1893 [10] which
   structures its codes in the form of x.yyy.zzz.  Taken from RFC 1893
   is the ABNF for the codes:

             status-code = class "." subject "." detail
             class = "2"/"3"/"4"/"5"
             subject = 1*3digit
             detail = 1*3digit









Popp, et. al.               Standards Track                    [Page 19]


RFC 3367         Common Name Resolution Protocol (CNRP)      August 2002


   The top level codes denote levels of severity of the status:

   o  1.X.X Informational

      *  The information conveyed by the code has no bearing or
         indication of the success or failure of any request.  It is
         strictly for informational purposes only.

   o  2.X.X Success

      *  The request was processed and results were returned.  In most
         cases, this status class won't be sent since actual results
         themselves denote success.  In other cases, results were
         returned but some information needs to be returned to the
         client.

   o  3.X.X Partial Success

      *  The request was processed and results were returned.  In this
         case though, some values sent with the request were either
         invalid or ignored but in a way that the server still considers
         the response to be a successful one and not indicative of any
         true error condition.

   o  4.X.X Transient Failure

      *  The request was valid as sent, but some temporary event
         prevents the successful completion of the request and/or
         sending of the results.  Sending in the future may be possible.

   o  5.X.X Permanent Failure

      *  A permanent failure is one which is not likely to be resolved
         by re-sending the request in its current form.  Some change to
         the request or the destination must be made for successful
         request.

   The second level codes denote the subject of the status messages.
   This value applies to each of the five classifications.  The subject
   sub-code, if recognized, must be reported even if the additional
   detail provided by the detail sub-code is not recognized.  The
   enumerated values for the subject sub-code are:









Popp, et. al.               Standards Track                    [Page 20]


RFC 3367         Common Name Resolution Protocol (CNRP)      August 2002


   o  X.0.X Other or Undefined Status


      *  No specific information is available about what subject class
         this message belongs to.

   o  X.1.X Query Related

      *  Any status related to some specific way in which the query was
         encoded or its values with the exception of properties.

   o  X.2.X Service Related

      *  Any status related to the service in which this server is
         cooperating in providing.

   Appendix B contains a list of all predefined status codes

4.2.5 Referral

   A Referral object in the results set is a place holder for un-fetched
   results from a different service and possibly dataset.  Referrals
   typically occur when a CNRP server knows of another service capable
   of providing relevant results for the query and wants to notify the
   client about this possibility.  The client can decide whether it
   wants to follow the referral and resolve the extra results by
   contacting the referred-to service using the information contained
   within the Referral object (a Service object and possible
   properties).  The Referral is a simple mechanism to enable
   hierarchical resolution as well as to join multiple resolution
   services together.




















Popp, et. al.               Standards Track                    [Page 21]


RFC 3367         Common Name Resolution Protocol (CNRP)      August 2002


   <results>
        <service id="i0">
             <serviceuri>http://cnrp.bar.com/</serviceuri>;
             <dataset id="i1">
                <property name="dataseturi">
                  urn:oid:1.3.6.1.4.1.782.1
                </property>
             </dataset>
             <dataset id="i2">
                <property name="dataseturi">
                  urn:oid:1.3.6.1.4.1.782.2
                </property>
             </dataset>
        </service>
        <resourcedescriptor>
             <commonname>bmw</commonname>
             <id>foo.com:234364</id>
             <resourceuri>http://www.bmw.de/</resourceuri>;
             <serviceref ref="i0" /><datasetref ref="i1" />
             <description>BMW Motorcycles, International</description>
             <property name="language" type="iso646">de-DE</property>
        </resourcedescriptor>
        <referral>
             <serviceref ref="i0" /><datasetref ref="i2" />
        </referral>
   </results>

   Like other CNRP objects, a referral can be further described using
   custom properties.  Like a resourcedescriptor, a referral can have an
   ID attribute that is used by a status message to talk about a
   particular referral block.

4.2.5.1 Loop Detection and Dataset Handling in Servers

   Referrals in CNRP can be handled in three ways:

   o  application specific,

   o  as hints only,

   o  rigorous loop detection.

   In the first two cases, the behavior of the client, when it receives
   a referral, is not defined in this memo.  The client can chase the
   referral in such a way as to treat it as a hint only.  In this case,
   datasets may or may not be handled.  Loop detection can be nothing
   more than, "Have I talked to this hostname before?" or "Stop after
   the 3rd referral".  These two cases are most likely to apply to



Popp, et. al.               Standards Track                    [Page 22]


RFC 3367         Common Name Resolution Protocol (CNRP)      August 2002


   simple or constrained implementations where the clients and servers
   have some a priori knowledge of their capabilities.  Without such
   knowledge there is too much ambiguity vis-a-vis services and datasets
   for clients to do reliable loop detection.

   The last case is where the client expects to talk to multiple servers
   that may know nothing about each other.  This case expresses the
   basic semantics of what a server should tell a client if it
   understands datasets or referrals.  Since a referral specifies the
   exact dataset to which it is referring, a node in the list of visited
   nodes is made up of a serviceuri and a dataseturi.  Both of these
   values need to be considered during loop detection.  In the case
   where a service does not support datasets, the visited node is made
   up of the service and the 'default dataset'.

   The major thing to remember when doing loop detection across servers
   is that some servers may not understand datasets at all, while others
   specifically rely on them.  To help determine how loop detection
   nodes should be marked, three specific status messages have been
   defined:

   The 3.1.3 (Datasets not supported) status message is used to denote
   that the server does not support datasets at all.  It is sent in
   response to a query containing datasets.  The client should consider
   that the server ignored the datasets and the client should consider
   this node to have been visited for all possible datasets (including
   the 'default' dataset).

   The 3.1.4 (First dataset only supported) status message is used by a
   server to indicate the situation where a client has included several
   dataseturis in its query and the server can only support one at a
   time.  In this case, the server is explicitly stating that it used
   the first dataseturi only.  The client should consider that only the
   first dataseturi specified was processed correctly.  The client
   should consider that the remaining datasets in the query were ignored
   completely.  They would need to be sent individually as referrals if
   the client really cares about those results.  Only the first
   serviceuri/dataseturi pair should be marked as visited.

   The 3.1.5 (This dataset not supported) status message is used to
   indicate that a specific dataseturi sent in a query by a client is
   not supported by the server.  This serviceuri/dataseturi pair should
   be considered as visited by the client.  If this message is sent in
   reply to a query specifying multiple datasets, the client should
   behave the same as if it received the 3.1.3 message from above.  It
   should be considered bad form for a server to send this status
   message back in response to a query with multiple datasets because it
   is ambiguous.



Popp, et. al.               Standards Track                    [Page 23]


RFC 3367         Common Name Resolution Protocol (CNRP)      August 2002


   While there is no exact algorithm for loop detection that clients are
   encouraged to support, these status messages can be used by the
   server to be clear about what Services and Datasets it considers to
   have been queried.  It is up to the client to decide what to do with
   these messages and how closely it attempts to do loop detection.

4.2.6 Discoverability: ServiceQuery and Schema

   A subclass of Query, the ServiceQuery object supports the dynamic
   discovery of a specific CNRP service's characteristics.  Note that
   CNRP compliance does not require that a service fully implements
   discoverability.  In particular, returning the Service object with
   its serviceuri constitutes a minimal yet sufficient compliant
   implementation.  Nevertheless, we expect that advanced CNRP services
   will choose to return a full description of their supported
   interfaces.

   The complete response to a servicequery returns the Service object
   described in section 5.3.2 with the following schema information:

   1.  The base and custom properties used by the CNRP service (Property
       schema),

   2.  The properties used to describe the Service object (Service
       schema),

   3.  The properties that belong to the query interface (Query schema),

   4.  The properties that belong to a resource within the results
       (Resource schema).

   These leads to the following new object definitions:

   o  propertyschema -- A property schema describes all the custom
      properties that are part of the service.

   o  propertydeclaration -- A property declaration describes a base or
      custom property used by the CNRP service.  A property declaration
      has a name and a type (the name and the type of the property that
      it refers to).  Note that as part of the property schema, one MUST
      declare both existing and newly defined properties.

   o  propertyreference -- A property reference is a reference to a
      property declaration so that a given schema (a service, query or
      resource schema) can declare the property within its interface.
      Note that a property reference specify whether the use of the
      property is required or optional only.




Popp, et. al.               Standards Track                    [Page 24]


RFC 3367         Common Name Resolution Protocol (CNRP)      August 2002


   o  serviceschema -- The service schema defines the properties used to
      describe the service.

   o  queryschema -- A query schema describes the structure of a query
      handled by the CNRP service.  The properties referred within the
      query schema are part of the query interface of the resolution
      service.

   o  resourcedescriptorschema -- A ResourceDescriptor schema describes
      the resource returned as a result by the CNRP service.

   For example, a CNRP query to discover a service's capabilities will
   be in the form:

   <cnrp> <servicequery/> </cnrp>

   And for a CNRP service for cocktail recipes in French, the
   corresponding response would be:

   <service>
        <serviceuri>http://cnrp.recipe.com</serviceuri>;
        <propertyschema>
           <propertydeclaration id="i1">
                 <propertyname>language</propertyname>
                 <propertytype>rfc1766</propertytype>
           </propertydeclaration>
           <propertydeclaration id="i2">
                 <propertyname>cocktailrecipe</propertyname>
                 <propertytype>freeform</propertytype>
           </propertydeclaration>
        </propertyschema>
        <queryschema>
             <propertyreference required="yes" ref="i1"/>
        </queryschema>
        <resourcedescriptorschema>
             <propertyreference required="yes" ref="i1"/>
             <propertyreference required="yes" ref="i2"/>
        </resourcedescriptorschema>
   </service>

   This response stipulates that the service accepts the property
   language as part of the query interface and returns
   resourcedescriptors that contain both the language and cocktailRecipe
   properties.







Popp, et. al.               Standards Track                    [Page 25]


RFC 3367         Common Name Resolution Protocol (CNRP)      August 2002


5. XML DTD for CNRP

   <!-- The document tag -->
   <!ELEMENT cnrp (query|results|servicequery)>

   <!-- Used to request a Service object -->
   <!ELEMENT servicequery EMPTY>

   <!-- A query can either request a schema, a specific record by -->
   <!-- id, or a common-name with a set of properties (or         -->
   <!-- assertions) about the entity doing the query.             -->
   <!ELEMENT query (id|(commonname,property*))>
   <!ELEMENT id (#PCDATA)>

   <!ELEMENT commonname (#PCDATA)>
   <!-- NOTE: CNRP defines several well known properties          -->
   <!-- and types. See Appendix A for details.                    -->
   <!ELEMENT property (#PCDATA)>
   <!-- The name of the property -->
   <!ATTLIST property name CDATA #REQUIRED>
   <!-- The type of the property -->
   <!ATTLIST property type CDATA "freeform">

   <!ELEMENT results (status? |
                      ( service+,
                           ( status  | resourcedescriptor | referral )*
                      )*
                     )>

   <!ELEMENT resourcedescriptor (commonname,id,resourceuri,
       serviceref, datasetref?,
       description,
       property*)>
   <!ATTLIST resourcedescriptor id ID #IMPLIED>

   <!-- The entire point of all this... -->
   <!ELEMENT resourceuri (#PCDATA)>
   <!ELEMENT description (#PCDATA)>

   <!ELEMENT referral (serviceref, datasetref?)>
   <!ATTLIST referral id ID #IMPLIED>

   <!ELEMENT status (#PCDATA)>
   <!ATTLIST status code CDATA #REQUIRED>
   <!ATTLIST status ref IDREF #IMPLIED>

   <!-- serviceRef is used to point to one of a set of provided   -->
   <!-- service objects. This is so that a resource can point to  -->



Popp, et. al.               Standards Track                    [Page 26]


RFC 3367         Common Name Resolution Protocol (CNRP)      August 2002


   <!-- which service it came from. We could include the entire   -->
   <!-- service object but then we would be repeating large       -->
   <!-- amounts of information.                                   -->

   <!ELEMENT serviceref EMPTY>
   <!ATTLIST serviceref ref IDREF #IMPLIED>

   <!ELEMENT service (serviceuri, dataset*,
      servers?,
      description?,
      property*,propertyschema?,queryschema?,resourcedescriptorschema?,
      serviceschema?)>
   <!-- The time to live of the schema in seconds since it was   -->
   <!-- retrieved -->
   <!ATTLIST service ttl CDATA "0">
   <!ATTLIST service id ID #IMPLIED>
   <!ELEMENT serviceuri (#PCDATA)>
   <!ELEMENT servers (server+)>
   <!ELEMENT server (serveruri, property*)>
   <!ELEMENT serveruri (#PCDATA)>

   <!ELEMENT dataset (property*)>
   <!ATTLIST dataset id ID #IMPLIED>

   <!ELEMENT datasetref EMPTY>
   <!ATTLIST datasetref ref IDREF #IMPLIED>

   <!ELEMENT propertyschema (propertydeclaration*)>
   <!ELEMENT propertydeclaration (propertyname, propertytype*)>
   <!ATTLIST propertydeclaration id ID #IMPLIED>

   <!ELEMENT propertyname (#PCDATA)>
   <!ELEMENT propertytype (#PCDATA)>
   <!-- This specifies if the type is meant to be the default -->
   <!-- type. This is usually reserved for "freeform".        -->
   <!ATTLIST propertytype default (no|yes) "no">

   <!-- The properties you can use in a query -->
   <!ELEMENT queryschema (propertyreference*)>

   <!-- The properties you can expect to see in an Resource -->
   <!ELEMENT resourcedescriptorschema (propertyreference*)>

   <!-- The properties you can expect to find in a Service  -->
   <!-- definition -->
   <!ELEMENT serviceschema (propertyreference*)>

   <!ELEMENT propertyreference EMPTY>



Popp, et. al.               Standards Track                    [Page 27]


RFC 3367         Common Name Resolution Protocol (CNRP)      August 2002


   <!-- This specifies if a property is required as part of -->
   <!-- the query. -->
   <!ATTLIST propertyreference ref IDREF #REQUIRED>
   <!ATTLIST propertyreference required (no|yes) "no">

6. Examples

6.1 Service Description Request

   This is what the client sends when it is requesting a servers schema.

   <?xml version="1.0"?>
   <!DOCTYPE cnrp PUBLIC "-//IETF//DTD CNRP 1.0//EN"
    "http://ietf.org/dtd/cnrp-1.0.dtd">;
   <cnrp>
        <servicequery />
   </cnrp>

   This is the result.  Notice how the Service tag is used to allow the
   service to describe itself in its own terms.

   <?xml version="1.0"?>
   <!DOCTYPE cnrp PUBLIC "-//IETF//DTD CNRP 1.0//EN"
    "http://ietf.org/dtd/cnrp-1.0.dtd">;
   <cnrp>
    <results>
     <service ttl="43200">
       <serviceuri>urn:foo:bar</serviceuri>
       <servers>
         <server>
             <serveruri>http://host1.acmecorp.com:4321/foo?</serveruri>;
         </server>
         <server>
             <serveruri>smtp://host2.acmecorp.com:4321/foo?</serveruri>
         </server>
       </servers>
       <description>This is the Acme CNRP Service</description>
       <!-- This property means that Acme specializes in
            tradename services -->
       <property name="category" type="naics">544554</property>
       <property name="BannerAdServer" type="uri">
                 http://adserver.acmecorp.com/
       </property>
       <propertyschema>
         <propertydeclaration id="i1">
           <propertyname>workgroupID</propertyname>
           <propertytype default="yes">freeform</propertytype>
           <propertytype default="no">domainname</propertytype>



Popp, et. al.               Standards Track                    [Page 28]


RFC 3367         Common Name Resolution Protocol (CNRP)      August 2002


         </propertydeclaration>
         <propertydeclaration id="i2">
           <propertyname>BannerAdServer</propertyname>
           <propertytype default="yes">URI</propertytype>
         </propertydeclaration>
       </propertyschema>
       <queryschema>
           <propertyreference ref="i1" required="yes" />
       </queryschema>
       <resourcedescriptorschema>
           <propertyreference ref="i1" required="yes" />
       </resourcedescriptorschema>
       <serviceschema>
           <propertyreference ref="i2" required="yes" />
       </serviceschema>
     </service>
    </results>
   </cnrp>

6.2 Sending A Query and Getting A Response

   This is the query that is sent from the client to the server:

   <?xml version="1.0"?>
   <!DOCTYPE cnrp PUBLIC "-//IETF//DTD CNRP 1.0//EN"
    "http://ietf.org/dtd/cnrp-1.0.dtd">;
   <cnrp>
    <query>
       <commonname>Fido</commonname>
       <property name="geography" type="iso3166-2">
          CA-QC</property>
       <property name="geography" type="iso3166-1">CA</property>
       <property name="language" type="rfc1766">fr-CA</property>
    </query>
   </cnrp>

   This is the result set.  It is sent back in response to the query.
   This result set includes a referral and a non-fatal error.

   <?xml version="1.0"?>
   <!DOCTYPE cnrp PUBLIC "-//IETF//DTD CNRP 1.0//EN"
    "http://ietf.org/dtd/cnrp-1.0.dtd">;
   <cnrp>
     <results>
       <service id="i0">
         <serviceuri>http://acmecorp.com</serviceuri>;
       </service>
       <service id="i1">



Popp, et. al.               Standards Track                    [Page 29]


RFC 3367         Common Name Resolution Protocol (CNRP)      August 2002


         <serviceuri>http://serverfarm.acmecorp.com</serviceuri>;
       </service>
       <service id="i2">
         <serviceuri>http://servers.acmecorp.co.uk</serviceuri>;
       </service>
       <resourcedescriptor>
         <commonname>Fidonet</commonname>
         <id>1333459455</id>
         <resourceuri>http://www.fidonet.ca</resourceuri>;
         <serviceref ref="i0" />
         <description>This is ye olde Canadian Fidonet</description>
       </resourcedescriptor>
       <resourcedescriptor>
         <commonname>Fidonet</commonname>
         <id>1333459455</id>
         <resourceuri>http://host:port/bla</resourceuri>;
         <serviceref ref="i1" />
         <description>An old Fidonet node</description>
       </resourcedescriptor>
       <referral><serviceref ref="i2" /></referral>
       <status code="3.1.1">
           The language property 'fr-CA' was ignored
       </status>
     </results>
   </cnrp>

7. Transport

   Two CNRP transport protocols are specified.  HTTP is used due to its
   popularity and ease of integration with other web applications.  SMTP
   is also used as a way to illustrate a protocol that has a much
   different range of  latency than most protocols.

   In the cases where transports use MIME Media Types (HTTP and SMTP
   being examples of such), the CNRP payload MUST use the
   'application/cnrp+xml' media type.  See Section 8 for the
   registration template for this media type.  One important note about
   this media type is that, since CNRP always uses UTF-8, there is no
   charset attribute.

7.1 HTTP Transport

   The HTTP transport is fairly simple.  The client connects to an HTTP
   based CNRP server and issues a request using the POST method to the
   "/" path with the Content-type and Accept header set to
   "application/cnrp+xml".  The content of the POST body is the CNRP XML
   document that is being sent.  All HTTP 1.1 features are allowed
   during the request.



Popp, et. al.               Standards Track                    [Page 30]


RFC 3367         Common Name Resolution Protocol (CNRP)      August 2002


   The results are sent back to the client with a Content-Type of
   "application/cnrp+xml".  The body of the result is the CNRP XML
   document being  sent to the client.

7.2 SMTP Transport

   The SMTP transport is very similar to the HTTP transport.  Since
   there is no method to specify, the CNRP XML document is simply sent
   to a particular SMTP endpoint with its Content-Type set to
   "application/cnrp+xml".  The server responds by sending a response to
   the originator of the request with the results in the body and the
   Content-Type set to "application/cnrp+xml".  The Service MUST specify
   at least one SMTP target (email address) to contact.

8. Registration: application/cnrp+xml

   This is the registration template for 'application/cnrp+xml' per [6].

   MIME media type name: application

   MIME subtype name: cnrp+xml

   Required parameters: none

   Optional parameters: none

   Encoding considerations: This media type consists of 8bit text which
      may necessitate the use of an appropriate content transfer
      encoding on some transports.  Since these considerations are the
      same as XML in general, RFC3023's [6] discussion of XML and MIME
      is applicable.

   Security considerations: none specific to this media type.  See
      Section 9 for general CNRP considerations.

   Interoperability considerations: n/a

   Published specification: This media type is a proper subset of the
      the XML 1.0 specification [8] except for the limitations placed on
      tags and encodings by this document.

   Applications which use this media type: any CNRP client/server
      wishing to send or receive CNRP requests or responses

   Additional Information: none

   Contact for further information: c.f., the "Author's Address" section
      of this memo



Popp, et. al.               Standards Track                    [Page 31]


RFC 3367         Common Name Resolution Protocol (CNRP)      August 2002


   Intended usage: limited use

   Author/Change controller: the IESG

9. Security Considerations

   Three security threats exist for CNRP or applications that depend on
   it:  Man in the Middle attacks, malicious agents posing as a service
   by spoofing a Service object, and denial of service attacks caused by
   adding a new level of indirection for resolution of a resource.

   The proposed solution for man in the middle attacks is to utilize
   transport level authentication and encryption, where available.  In
   the case where the transport can't provide the level of required
   authentication, individual entries or the entire response can be
   signed/encrypted using XML signature methods being developed by the
   XMLDSIG Working Group.

   In the case of where a service attempts to pose as another by
   spoofing the serviceuri in the Service object, the Service object
   should be signed.  A client can then verify the Service object's
   veracity by verifying the signature.  How the client obtains that
   authoritative public key is out of scope since it depends on the
   service discovery problem.

   While this document cannot propose a solution for Denial Of Service
   (DOS) attacks, it can illustrate that, like many other cases, any
   time a new level of indirection is created, an opportunity for a DOS
   attack is created.  Service providers are encouraged to be aware of
   this and to act accordingly to mitigate the effects of a DOS attack.

10. IANA Considerations

   The major consideration for the IANA is that the IANA will be
   registering well known properties, property types and status
   messages.  It will not register values.  Since this document does not
   discuss CNRP service discovery, the IANA will not be registering the
   existence of servers or Server objects.

   There are three types of entities the IANA can register: properties,
   property types, and status messages.  If a property or type is not
   registered with the IANA, then they must start with "x-".  Status
   messages can be created for local consumption and not registered.
   There is no requirement that new status messages are mandatory to
   implement unless this document is updated.  Status message
   registrations are more for informational purposes.





Popp, et. al.               Standards Track                    [Page 32]


RFC 3367         Common Name Resolution Protocol (CNRP)      August 2002


   The required information for the registration of a new property is
   the property's name, its default type, and a general description.  A
   new type requires the type's name, what properties it is valid for,
   and a description.  A new status message requires the X.Y.ZZZ code
   and a brief description of the state being communicated.

   All properties, types and status messages are registered on a First
   Come First Served basis with no review by the IANA or any group of
   experts.  The consensus opinion of the CNRP Working Group is that
   review of property registrations should occur once there is
   operational experience with the protocol and an actual need for the
   review.  If, at some future date, this policy needs to change, this
   document will be updated.

   The property and type registration templates found in Appendix A
   should be registered by the IANA at publication time of this
   document.

   The IANA is also directed to register the Media Type specified in
   Section 8.

References

   [1]   United States, "North American Industry Classification System",
         January 1997, <http://www.census.gov/epcd/www/naics.html>;.

   [2]   Fielding, R., Gettys, J., Mogul, J., Frystyk, H., Masinter, L.,
         Leach, P. and T. Berners-Lee, "Hypertext Transfer Protocol --
         HTTP/1.1", RFC 2616, June 1999.

   [3]   Berners-Lee, T., Fielding, R. and L. Masinter, "Uniform
         Resource Identifiers (URI): Generic Syntax", RFC 2396, August
         1998.

   [4]   Alvestrand, H., "Tags for the Identification of Languages", RFC
         1766, March 1995.

   [5]   Moats, R., "URN Syntax", RFC 2141, May 1997.

   [6]   Murata, M., St. Laurent, S. and D. Kohn, "XML Media Types", RFC
         3023, January 2001.

   [7]   Bradner, S., "Key words for use in RFCs to Indicate Requirement
         Levels", BCP 14, RFC 2119, March 1997.

   [8]   Bray, T., Paoli, J. and C. Sperberg-McQueen, "Extensible Markup
         Language (XML) 1.0", February 1998.




Popp, et. al.               Standards Track                    [Page 33]


RFC 3367         Common Name Resolution Protocol (CNRP)      August 2002


   [9]   Mealling, M., "The 'go' URI Scheme for the Common Name
         Resolution Protocol", RFC 3368, August 2002.

   [10]  Vaudreuil, G., "Enhanced Mail System Status Codes", RFC 1893,
         January 1996.

   [11]  "Country and Region Codes", ISO 3166, January 1996.












































Popp, et. al.               Standards Track                    [Page 34]


RFC 3367         Common Name Resolution Protocol (CNRP)      August 2002


Appendix A. Well Known Property and Type Registration Templates

A.1 Properties

   Property Name: geography
   Default Type: iso3166-1
   Description: A geographic location

   Property Name: language
   Default Type: rfc1766
   Description: A language specification

   Property Name: category
   Default Type: freeform
   Description: A node in some system of semantic relationships that is
   considered relevant to the common-name.

   Property Name: range
   Default Type: range
   Description: A range given in the format "x,y" where x is the
   starting point and y is the length.  This property is used by the
   client to tell the server that is is requesting a subrange of the
   results.

   Property Name: dataseturi
   Default Type: uri
   Description: A URI used to disambiguate between two Datasets offered
   by the same Service.

A.2 Types

   Type: freeform
   Property: category
   Description: The value is to be interpreted by the server the best
   way it knows how.  This value has no defined structure.
















Popp, et. al.               Standards Track                    [Page 35]


RFC 3367         Common Name Resolution Protocol (CNRP)      August 2002


   Type: freeform
   Property: geography
   Description: The value is to be interpreted by the server the best
   way it knows how.  This value has no defined structure.

   Type: freeform
   Property: language
   Description: The value is to be interpreted by the server the best
   way it knows how.  This value has no defined structure.

   Type: iso3166-2
   Property: geography
   Description: The combination of country and sub-region codes found in
   ISO 3166-2 [11].

   Type: iso3166-1
   Property: Geography
   Description: Country Codes found in ISO 3166-1 [11].

   Type: postalcode
   Property: Geography
   Description: A postal code that is valid for some region.  A good
   example is the Zip code system used in the US.

   Type: lat-long
   Property: Geography
   Description:

      Values for latitude and longitude shall be expressed as decimal
      fractions of degrees.  Whole degrees of latitude shall be
      represented by a two-digit decimal number ranging from 0 through
      90.  Whole degrees of longitude shall be represented by a decimal
      number ranging from 0 through 180.  When a decimal fraction of a
      degree is specified, it shall be separated from the whole number
      of degrees by a decimal point.  Decimal fractions of a degree may
      be expressed to the precision desired.

      Latitudes north of the equator shall be specified by a plus sign
      (+), or by the absence of a minus sign (-), preceding the
      designating degrees.  Latitudes south of the Equator shall be
      designated by a minus sign (-) preceding the two digits
      designating degrees.  A point on the Equator shall be assigned to
      the Northern Hemisphere.

      Longitudes east of the prime meridian shall be specified by a plus
      sign (+), or by the Longitudes west of the meridian shall be
      designated by minus sign (-) preceding the digits designating
      degrees.  A point on the prime meridian shall be assigned to the



Popp, et. al.               Standards Track                    [Page 36]


RFC 3367         Common Name Resolution Protocol (CNRP)      August 2002


      Eastern Hemisphere.  A point on the 180th meridian shall be
      assigned to the Western Hemisphere.  One exception to this last
      convention is permitted.  For the special condition of describing
      a band of latitude around the earth, the East Bounding Coordinate
      data element shall be assigned the value +180 (180) degrees.

      Any spatial address with a latitude of +90 (90) or -90 degrees
      will specify the position at the North or South Pole,
      respectively.  The component for longitude may have any legal
      value.

      With the exception of the special condition described above, this
      form is specified in Department of Commerce, 1986, Representation
      of geographic point locations for information interchange (Federal
      Information Processing Standard 70-1):  Washington, Department of
      Commerce, National Institute of Standards and Technology.

            DEGREES   = *PLUSMINUS DIGITS '.' DIGITS
            PLUSMINUS = + | -
            DIGITS    = DIGIT *DIGIT
            DIGIT     = 0 | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9


   Type: rfc1766
   Property: Language
   Description: language codes as defined by RFC 1766 [4]

   Type: naics
   Property: Category
   Description: North American Industry Code System [1]

   Type: uri
   Property: dataseturi
   Description: A URI adhering to the 'absoluteURI' production of the
   Collected ABNF found in [3]

Appendix B. Status Codes

B.1 Level 1 (Informative) Codes

   1.0.0 -- Undefined Information
      This code is used for any non-categorizable and informative
      message.  If, for example, the server wanted to tell the client
      that the systems administrator's cat has blue hair, then this code
      would be the appropriate place for this information.






Popp, et. al.               Standards Track                    [Page 37]


RFC 3367         Common Name Resolution Protocol (CNRP)      August 2002


   1.1.0 -- Query related information
      This code is used for any informative information concerning the
      query that client sent.  For example, "The query you sent was
      rather interesting!".

   1.2.0 -- An informative message pertaining to the Service
      This message concerns the Service in the general sense.

B.2 Level 2 (Success) Codes

   2.0.0 -- Something undefined succeeded
      There was success but the situation that this message concerns is
      undefined.

   2.1.0 -- Query succeeded
      The query succeeded.  This message MUST be returned when there
      were no results that matched the query.  I.e., the query was
      successfully handled and the correct set of results contained no
      resources or referrals.  The lack of results is not an error but a
      successful statement about the common-name.

   Note: The apparent lack of 2.X.X level codes is caused by success
   usually being indicated not by a status message but by the server
   returning only the objects that the client requested.

B.3 Level 3 (Partial Success) Codes

   3.0.0 -- Something undefined was only partially successful
      Some request by the client was only partially successful.  The
      exact situation or cause of that partial failure is not defined.

   3.1.0 -- The query was only partially successful.

   3.1.1 -- The query contained invalid or unsupported properties
      The query contained invalid or unsupported property names, types
      or values.  The invalid properties were ignored and the query
      processed.

   3.1.2 -- The XML was well formed but invalid
      The XML sent by the client was well formed but invalid.  The
      server was smart enough to figure out what the client was talking
      about and return some results.









Popp, et. al.               Standards Track                    [Page 38]


RFC 3367         Common Name Resolution Protocol (CNRP)      August 2002


   3.1.3 Server does not support datasets
      This status should be generated by servers that do not handle
      datasets.  A server can send this status message at any time, but
      it especially useful for when a server receives a query from a
      client that contains a dataseturi.  In this case and if the client
      is doing rigorous loop detection, the client should consider this
      entire service to have been visited.

   3.1.4 The first dataset in the list of datasets you gave in the
         query was the only one used.
      This status message is used by a server to indicate the situation
      where a client has included several dataseturis in its query and
      the server can only support one at a time.  In this case the
      server is explicitly stating that it used the first dataseturi
      only.  The client should consider that only the first dataseturi
      specified was processed correctly.  The client should consider
      that the remaining datasets in the query were ignored completely.

      They would need to be sent individually as referrals if the client
      really cares about those results.  Only the first
      serviceuri/dataseturi pair should be marked as visited if loop
      detection is being handled.

   3.1.5 This dataset not supported.
      This message is used to indicate that a specific dataseturi sent
      in a query by a client is not supported by the server.  This
      serviceuri/dataseturi pair should be considered as visited by the
      client.  If this message is sent in reply to a query specifying
      multiple datasets, the client should behave the same as if it
      received the 3.1.3 message from above.  It should be considered
      bad form for a server to send this status message back in response
      to a query with multiple datasets because it is ambiguous.

   3.2.0 -- The server caused a partially successful event
      Due to some internal server error, the results returned were
      incomplete.

   3.2.1 -- Some referral server was unavailable
      This status message is used to denote that one or more of the
      referral services that are normally queried was unavailable.
      Results were generated, but they may not be representative of a
      complete answer.









Popp, et. al.               Standards Track                    [Page 39]


RFC 3367         Common Name Resolution Protocol (CNRP)      August 2002


B.4 Level 4 (Transient Failure) Codes

   4.0.0 -- Something undefined caused a persistent transient failure.

   4.1.0 -- There was an error in the query that made it unable to be
            interpreted.

   4.2.0 -- The query was to complex
      The query as specified was too complex for this Service to handle.

   4.2.1 -- The Service was too busy
      Due to resource constraints, the entire service is too busy to
      handle requests.  This means that any of the Servers cooperating
      in providing this Service would have also returned this same
      message.

   4.2.2 -- The Server is in maintenance
      This server is now in maintenance mode.  Try another server from
      this service or try again at a later time.

   4.2.3 -- The Server had an internal error
      There was an internal error that caused the server to fail
      completely.

B.5 Level 5 (Permanent Failures) Codes.

   5.0.0 -- Something undefined caused a permanent failure.

   5.1.0 -- The query permanently failed.

   5.2.0 -- The service had a permanent failure.

   5.2.1 -- This Service is no longer available.
      This Service has decided to no longer make itself available.

   5.2.2 -- The Server had a permanent failure.
      This server has permanently failed.  Try another server from this
      service.













Popp, et. al.               Standards Track                    [Page 40]


RFC 3367         Common Name Resolution Protocol (CNRP)      August 2002


Authors' Addresses

   Nico Popp
   VeriSign, Inc.
   487 East Middlefield Road
   Mountain View, CA 94043

   Phone: (650) 426-3291
   EMail: npopp@verisign.com


   Michael Mealling
   VeriSign, Inc.
   21345 Ridgetop Circle
   Sterling, VA  20166
   US

   EMail: michael@verisignlabs.com


   Marshall Moseley
   Netword, Inc.
   702 Russell Avenue
   Gaithersburg, MD  20877-2606
   US

   Phone: (240) 631-1100
   EMail: marshall@netword.com























Popp, et. al.               Standards Track                    [Page 41]


RFC 3367         Common Name Resolution Protocol (CNRP)      August 2002


Full Copyright Statement

   Copyright (C) The Internet Society (2002).  All Rights Reserved.

   This document and translations of it may be copied and furnished to
   others, and derivative works that comment on or otherwise explain it
   or assist in its implementation may be prepared, copied, published
   and distributed, in whole or in part, without restriction of any
   kind, provided that the above copyright notice and this paragraph are
   included on all such copies and derivative works.  However, this
   document itself may not be modified in any way, such as by removing
   the copyright notice or references to the Internet Society or other
   Internet organizations, except as needed for the purpose of
   developing Internet standards in which case the procedures for
   copyrights defined in the Internet Standards process must be
   followed, or as required to translate it into languages other than
   English.

   The limited permissions granted above are perpetual and will not be
   revoked by the Internet Society or its successors or assigns.

   This document and the information contained herein is provided on an
   "AS IS" basis and THE INTERNET SOCIETY AND THE INTERNET ENGINEERING
   TASK FORCE DISCLAIMS ALL WARRANTIES, EXPRESS OR IMPLIED, INCLUDING
   BUT NOT LIMITED TO ANY WARRANTY THAT THE USE OF THE INFORMATION
   HEREIN WILL NOT INFRINGE ANY RIGHTS OR ANY IMPLIED WARRANTIES OF
   MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.

Acknowledgement

   Funding for the RFC Editor function is currently provided by the
   Internet Society.



















Popp, et. al.               Standards Track                    [Page 42]


Hosting by: Hurra Communications Ltd.
Generated: 2007-01-26 17:59:36