Next Previous Contents

13. Debian installation

I'm a Debian proselyte since it is my first Debian installation. Debian lovers are the same kind of people as Macintosh lovers or Linux lovers in the operating systems space. Nothing else counts. Since I'm already a Mac and Linux lover (and French too :-) it was time to fall in love.

Debian is well, clearly and internationally documented. Thanks to all those people who bred this really open distribution.

I could leave you on your own during the installation process. But since we have to interact with a shell during it, the entire process will be described in detail.

I know the description is Debian specific. I prefer to give you a complete example than nothing except a ``run a shell at the right moment and type bla bla...''. I do like concrete examples.

Simon Forget <> told me he could not use this howto with his Toshiba Libretto 50CT because the kernel could not recognize the pcmcia floppy drive during the installation process. I don't know why but there is a solution using plip, if you already have a dos partition on the target computer.

This solution is simpler and faster because no floppy drive nor plip network is necessary during the installation process. If you are interested in this solution, go directly to the section Installing from a DOS partition. I'm keeping the old installation routine because this new one needs a DOS partition that becomes superfluous when you definitely want to leave the dark side.

13.1 Preparing the two floppies

On the source side, mount the cdrom and go to the install directory

      $ mount -t iso9660 /dev/hdd  /cdrom

The device for your CDROM may be /dev/hdb or /dev/hdc or another device (SCSI), depending on where is plugged your CDROM.

      $ cd /cdrom/debian/dists/stable/main/disks-i386/current/

Read the file install.html with a browser or install.txt with a more, a less, a cat (or a dog?).

Now, record the install (alias rescue) floppy. Write a "resc1440.bin" label on it:

      $ dd if=resc1440.bin of=/dev/fd0H1440

Write the drivers floppy. Write a "drv1440.bin" label on it:

      $ dd if=drv1440.bin of=/dev/fd0H1440

Then make sure that the floppies are write-protected.

Now you're ready to start the real installation process.

13.2 The real installation process

Insert the resc1440.bin floppy on target drive. Reboot your target box.

     Welcome to Debian GNU/Linux 2.x!

Read the text. The prompt is:


Press <ENTER>

     Loading root.bin...........
     loading linux...

A new screen:

     Next: Select Color or Monochrome display

Choose yours with the arrow up/down keys and press <ENTER>

     Next: Continue with the installation

press <ENTER>

     Software in the Public Interest 
      *** Debian GNU/Linux 2.1 ***

Read the text Press <ENTER> (You see <Continue> on the screen)

     Next: Configure the Keyboard

press <ENTER> Select your country and press <ENTER>

     Next : Partition a Hard Disk

Press <ENTER>

     Select Disk Drive 
     usually /dev/hda

If you have several disks choose the good one (where you want to install Linux) and press <ENTER>

You are now using the program cfdisk. Using cfdisk is safe until you decide to [Write] the partition on disk. Leaving cfdisk with [Quit] is safe.

We are going to make just two new primary partitions, a Swap one and a big Linux one. If you want to create more partitions, leave some free space or extended partitions, you can. But read the documentation about "Partitioning" in the Installation-HOWTO, especially if you have more than 1024 cylinders and an old version of LILO.

If you previously ran the FIPS program, you see the hda1 partition (DOSFAT16). Switch to the next free partition with the up/down arrow keys.

Select [New] with the right/left arrow keys and press <ENTER>

Select [Primary] and press <ENTER>

Enter the size of your swap partition. Twice the RAM is usual if you have less than 128 megabytes of ram. If you have 2 gigabytes of RAM, it's because you don't want to swap. In that case, no swap partition is needed.

Select [Beginning] and press <ENTER>

Select [Type] and press <ENTER>. Type 82 (Linux Swap) and press <ENTER>.

Switch to the next free partition with the up/down arrow keys. Select [New] and press <ENTER>

Select [Primary] and press <ENTER>

Enter the size in MB (you can leave the default) and press <ENTER> Its type should be already Linux. If not, change to Linux (83) with [Type]

The partition table is defined now. Verify everything looks good. If you're not sure, read the documentation with [Help]. If doubts are still there, select [Quit] and leave the installation process. Go for a walk and restart from the beginning of this section.

I assume you are confident now.

Select [Write]

     Are you sure you want to write the partition table to disk?

Type "yes" and press <ENTER>

Select [Quit] and press <ENTER>

     Next: Initialize and Activate a Swap Partition

Press <ENTER>

     Please select the partition to initialize as a swap device

Select /dev/hda2 (normally already selected). Press <ENTER>

     Scan for Bad Blocks?

select <YES> and press <ENTER>

     Are you Sure?

select <YES> and press <ENTER>

     Initializing swap partition

     Next: Initialize a Linux Partition

Press <ENTER>

     Select Partition. Please select the partition to initialize as a
     Linux "ext2" file-system.

Select /dev/hda3 (normally already selected) and press <ENTER>.

     Scan for Bad Blocks?

Select <YES> and press <ENTER>

     Are you Sure?

Select <YES> and press <ENTER>

A new page full of numbers. You can take a rest because it takes some time (especially with a big hard disk).

     Next: Mount a Previously-Initialized Partition

Press <ENTER>

     Please select the partition to mount

Select /dev/hda3 and press <ENTER>

     Mount the /dev/hda3 device as the Root FileSystem?

Select <Yes< and press <ENTER>

     Next: Install Operating System Kernel and Modules

Press <ENTER>

     Please select the medium you will use to install the system

Select /dev/fd0 and press <ENTER>

     Please place the Rescue Floppy in the first floppy drive

The floppy is already there.
Select <Continue> and press <ENTER>

     Installing the Rescue Floppy ...
     Please place the Drivers Floppy in the first floppy drive

Eject the Rescue Floppy and insert the Drivers Floppy, the one I you labelled drv1440.bin (you did it, didn't you?).
Select <Continue> and press <ENTER>

     Installing the Drivers  Floppy ...

A new screen:

     Next: Configure Device Driver Modules

Press <ENTER>

     Select Category

Read the text.

     Please select the category of modules

Select net and press <ENTER>
Select plip.

     Module plip

Select "Install the module in the kernel" and press <ENTER>
No parameters are needed.
Select <Ok> and press <ENTER>

     Installation succeeded
     Please press ENTER when you are ready to continue.

Press <ENTER>

Select Exit ("Finished with these modules") and press <ENTER>
Then you see the same kind of screen again.
Select Exit ("Finished with these modules") and press <ENTER>

     Next: Configure the Network

Choose a name, you can use a different name than debian or target.
Press <ENTER>

     Is your system connect to a network? 

Select <No> and press <ENTER>

STOP STOP STOP. You see now:

     Next: Install the base system

Now we need a shell.

Press Alt F2 and <ENTER> You are in a root shell.

13.3 An installation break: PLIP on the target side

You are in a root shell.

Verify the plip module is loaded:

     $ lsmod
     Module    Pages    Used by
     plip          3          0

Find the exact name of the plip interface:

     $ dmesg
     NET3 PLIP version 2.2
     plip1: Parallel port at 0x378, using assigned IRQ 7

You can find the same information with

     $ cat /proc/kmsg
     <4>NET3 PLIP version 2.2
     <4>plip1: Parallel port at 0x378, using assigned IRQ 7
     Ctrl-c (or ^C if you prefer)

Configure the plip interface:

     $ ifconfig plip1  pointopoint netmask up

Verify everything is ok:

     $ ifconfig plip1 
     plip0     Link encap:Ethernet  HWaddr FC:FC:C0:A8:00:01
          inet addr:  P-t-P:  Mask:
          UP POINTOPOINT RUNNING NOARP  MTU:1500  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          Interrupt:7 Base address:0x378

Verify the route to source exists:

     $ route 
     Kernel IP routing table
     Destination     Gateway         Genmask         Flags Metric Ref    Use Iface       U     0      0        0 lo

If not, like in the previous example, add the route to, the source:

     $ route add -host dev plip1

Now the route is installed:

     $ route 
     Kernel IP routing table
     Destination     Gateway         Genmask         Flags Metric Ref    Use Iface UH    0      0        0 plip1       U     0      0        0 lo

Now you can perform a successful ping from the source server (ping is not available on the Debian install process):

     $ ping target
     PING target ( 56 data bytes
     64 bytes from icmp_seq=0 ttl=64 time=14.0 ms
     64 bytes from icmp_seq=1 ttl=64 time=4.3 ms
     --- target ping statistics ---
     2 packets transmitted, 2 packets received, 0% packet loss
     round-trip min/avg/max = 4.3/9.1/14.0 ms

If it doesn't work, check the Null-Modem cable connection, rerun dmesg, ifconfig, route. Verify everything. Take a rest. Restart.

When the ping is okay, return to the normal installation process:

On the target: press Alt F1

13.4 Return to the normal install process

You are back to the normal installation process. You should still see:

     Next: Install the base system

Press <ENTER>

     Please select the medium you will use to install the system

Select nfs and press <ENTER>

     Please choose the NFS server and the mount path ...

Press <ENTER>

     Please choose the path inside the mounted NFS filesystem

Type /debian (normally already there) and press <ENTER>

If no error message complains about the nfs mount then bravo. You can verify this mount by entering the shell again:

Press Alt F2

     $ mount
     ... on /instmnt type nfs (rw, addr=

     $ ls /instmnt/debian
     README                 README.non-US          doc/
     README.CD-manufacture  README.pgp@            hamm/
     README.mirrors.html    TRANS.TBL              tools/
     README.mirrors.txt     dists/

Press Alt F1

You're back again to the normal installation process.

Now the plip nfs cdrom connection is done. Let's go on and finish our job.

     Please select the directory containing a file base2_0.tgz

Select list and press <ENTER>

     Please Wait 
     The installation program is building a list of ...

A new screen:

     Select Archive Path
     Please select the directory that you will use to install the Base
     System from.

Only one long item, already selected. Press <ENTER>

     The Base System is being extracted from

Take a second rest, you deserve it

     Next: Configure the Base System

Press <ENTER>

     Select Timezone

Select your timezone and your directory and press <ENTER>

     Timezone Configuration

Read and press <ENTER>

     Timezone Configuration.

An other page. Read, select <YES> and press <ENTER>

     Next: Make Linux Bootable Directly From Hard Disk

Press <ENTER>

     Create Master Boot Record?

Select <Yes> and press <ENTER>

     Make Linux the Default Boot Partition?

Select <No> and press <ENTER>

     Next: Make a boot Floppy

Press <ENTER>

     Change Disk
     Please place a blank floppy disk in the first floppy drive.

Do it and press <ENTER>
The floppy is being formatted

     Creating a filesystem on the floppy...
     Copying the operating system kernel...

A new screen:

     Next: Reboot the System

Press <ENTER>

     Reboot the system ?

Remove the floppy and press <ENTER>

The system reboots. Are you still with the dark side? I guess yes, so insert the boot floppy you've just made and reboot again with Ctrl-Alt-Del

See the boot messages.
Read the text.

     New password:

Enter a root password.

     Re-enter new password

Do it. And learn it.

     Shall I create a normal user account now? [Y/n]

Enter n and press <ENTER>. Unless you want to do it (it is safe and good, in fact).

     Shall I install shadow passwords? [Y/n]

Enter y and press <ENTER>

     Do you want to use a PPP connection to install

Enter n and press <ENTER>

     Now you may choose one of several selections ...
     Do you want to perform this step?

Enter n and press <ENTER>

     I'm going to start the 'dselect' program...

Press <ENTER>
Select [Q]uit and press <ENTER>

     You may now login as 'root' at the login: prompt...
     debian login:

Enter root.


Enter the root password.


The system is installed and working. CONGRATULATIONS!

My job stops here. Read the install documentation of your distribution and go on with the Unix system administration job.

When you reboot your system, the plip connection won't be in good shape. But now you know what to do.

I suggest you some work:

Next Previous Contents

Hosting by: Hurra Communications Ltd.
Generated: 2007-01-26 17:58:04